Gateway L110 User Manual Page 1

OfficeStation󲼷(L110) User’s GuideFast Ethernet VersionOne PC + OfficeStation solution = 10 happy users.

1-2System IntroductionsIntroductionsWhat is OfficeStation󲼷(L110)?OfficeStation is an unique networking device using WoIP(Windows over IP) based on net

1-3System IntroductionsOperates as a Host PC or terminal server.Windows󲼷2000 Professional or Windows󲼷XP Home Edition/Professional or Windows󲼷2000 Serv

1-4System IntroductionsSystem Requirements● To connect one OfficeStation terminal to a single Host PC, the following system requirement is needed of t

1-5System Introductions

1-6System IntroductionsOverviewFrontLights up when the system is on.Power IndicatorsBlinks when OfficeStation communicates with Host PC.LAN Operation

1-7System IntroductionsRearConnection for AC power adapter.Power Inlet(DC-IN) JackTurns On/Off the system.Power SwitchConnection for speakers or headp

1-8System IntroductionsConnecting Peripheral DevicesTo connect the peripheral devices to OfficeStation, refer to the following. (The peripheral device

1-9System IntroductionsConnecting OfficeStation󲼷(L110) with Host PCHub or Router(optional)Host PC (Optional)UserHost PC (optional)Cross CableDirect LA

Installing the SoftwareSetting up Network ConfigurationsUsing the SoftwareOfficeStation󲼷(L110) Console Management

2-2Software Installation and OperationInstalling the SoftwareBefore you install the software, please check the connection of the OfficeStation termina

Safety InstructionsSafety InstructionsThe following instructions pertain to the risk of fire, electric shock or bodily injury. Please read all of thes

2-3Software Installation and OperationIf the server has the latest version, You will be asked if you want to install the latest version as shown on th

2-4Software Installation and Operation89When the NCT-2000-XP-Terms of use window appears, check "I agree" andclick "Next". If you

2-5Software Installation and Operation10▶Administrator Password : If you logon by using this password, you can control the Network Administrator Conso

󳃨2-6Software Installation and OperationAfter collecting of Help Information, program files will be copied to the hard disk drive.13Click "Next&qu

2-7Software Installation and OperationClick "Start", click "All Programs", click “NCT-2000-XP”, and then click“Uninstall NCT-2000-

2-8Software Installation and OperationClick “Next”. 3Instruction message similar to the one shown in the figure appears if a serial numberis registere

2-9Software Installation and OperationNCT-2000-XP is being deleted.5After the programs have been removed from your computer, check “Yes,I want to rest

2-10Software Installation and OperationSetting up Network ConfigurationsIf your computer is using Windows󲼷2000 or XP or 2000 Server or Server 2003 an

2-11Software Installation and Operation󲽙 Check "Obtain an IP address automatically" and "Obtain DNS server address automatically,"

2-12Software Installation and Operation󲽛 Viewing the monitor connected to the OfficeStation terminal, the Setup window will appear. In the “Network” t

Safety InstructionsMaintenanceIf the product does not operate normally, adjust only those controls that are covered in the operating instructions. Imp

2-13Software Installation and Operation▶You have to know the allocated IP address that the Host PC received automatically. You can see the IP address

2-14Software Installation and Operation󲽝 If you finished the setting, click “Save”. Click “Connect”. (or Try Again)󲽞 Your OfficeStation terminal shoul

2-15Software Installation and Operation󲽗 Right click on the LAN adapter icon and select “Properties”. (In Windows󲼷2000, right click on the LAN adapter

2-16Software Installation and Operation󲽛 In the “Network” tab, check "Use Static IP address" and input the IP and Gatewayaddress you want to

2-17Software Installation and OperationDirectly Connecting the OfficeStation󲼷(L110) terminal to a Host PC< Cross Cable>< Host PC ><Offi

2-18Software Installation and Operation󲽘 Click “Internet Protocol (TCP/IP)” and click the “Properties”. 󲽙 Check "Use the following IP address&quo

2-19Software Installation and Operation󲽛 In the “Network” tab, check "Use Static IP address" and input IP and Gateway addressas below. (For

2-20Software Installation and OperationIf your Host PC has only one LAN adapter connected to the Internet, you have to install the LAN adapter to conn

2-21Software Installation and Operation

2-22Software Installation and OperationUsing the SoftwareIf you install the software, you can see the group and its program lists. To see thesoftware

Before You ReadBefore You ReadTrademarksNComputing, NComputing Co., Ltd. the NComputing logo, and other NComputing trademarks are the property of NCom

2-23Software Installation and OperationExplaining Software Settings(local) FunctionYou can refer to the options and function of each option. If you se

2-24Software Installation and Operation󳃨If you select this item, you can see the lists of the operating programsand information for each connected Off

2-25Software Installation and OperationViewing the Information of Each StationThis shows the running process lists of the connected OfficeStation term

2-26Software Installation and OperationInformation & SettingsShows the product information, manufactured date, manufacturer, copyright,and web sit

2-27Software Installation and OperationShows the general system information.󲻸Maximum number of stations : Shows the maximum number of stations that ca

2-28Software Installation and OperationDepending on the product, either user has to input the serial number or the serial number is automatically inpu

2-29Software Installation and Operation

2-30Software Installation and Operation▶Serial number and activation key for the product purchased should be registered by user using internet or othe

2-31Software Installation and Operation▶If you select the “Disable password protection” option, during software installation, thewindow requiring the

2-32Software Installation and OperationChoose one of the methods to register and click “Next”. 4● On Line : Connected to the internet“On Line – Regist

Notice▶Registration process may vary depending on your model.NoticeHow to register your S/W Serial Number(s) and S/W Activation Key(s)You will be requ

2-33Software Installation and Operation▶“On Line – Register by Internet” OptionThis option can be used to register by connecting directly to the Ncomp

2-34Software Installation and Operation❹ Start registering the serial number if all information is correct. Registration may not be completedif Host P

2-35Software Installation and Operation❹ Start unregistering serial number if all information is correct. Registration may not be completedif Host PC

2-36Software Installation and Operation❺ The unregistration process is complete. Click “Finish”.▶“Off Line – Registration via File/Email” OptionThis o

2-37Software Installation and Operation❹ Select file path and name to be created and click “Next”. Default file path and name are “MyDocument” and “RG

2-38Software Installation and Operation▶“Off Line – Unregistration via File/Email” OptionThis option must be used when canceling registration after re

2-39Software Installation and Operation❹ Select file path and name to be created and click “Next”. Default file path and name are“My Document” and “UR

2-40Software Installation and Operation󲽪 Select serial number to be canceled and click “Next”.󲽫 Screen showing user's registration information ap

2-41Software Installation and Operation󲽪 Text file received from the registration center or agent has two sets of six digit numbers, a total of twelve

2-42Software Installation and OperationNCT-2000-XP Internet UpdateIf you finished registering, you can update your NCT-2000-XP via Internet.With the f

How to Use OfficeStationHow to Use OfficeStation▶To connect the OfficeStation terminal directly to a Host PC, use a crossover LAN cable or Direct LAN

2-43Software Installation and OperationTo do continuous upgrade, you have to do “Internet Registration”. If you have already registered, update will

2-44Software Installation and OperationAfter finishing download of update file, program set up will proceed as Section 2-3 of "Software installat

2-45Software Installation and Operation

2-46Software Installation and OperationOfficeStation󲼷(L110) Console ManagementThank you for buying the NComputing OfficeStation terminal(s). This User

2-47Software Installation and OperationConnected with Host PC in Local Network. (Green Color Icon)Disconnected with Host PC in Local Network. (Blue Co

2-48Software Installation and Operation▶OfficeStation information (Connections Settings, Network Settings, Setup Password and Language) changed in the

2-49Software Installation and OperationAuto Connection FunctionWith the “Auto Connection” function, you can easily connect to a Host PC without using

2-50Software Installation and OperationIntroducing the Auto connection setup󲽕 Click “Setup” to setup your connection menu.Setting up your Auto Connect

2-51Software Installation and Operation󲽕 Click “Hardware Settings (LAN/Local)” menu from NCT-2000-XP Console.󲽖 Click “UTMA/UTSA Devices” setup menu.󲽗

2-52Software Installation and OperationAuto Logon FunctionWith the “Auto Logon” function, you can easily connect to a Host PC(s) without fill in the W

Unpacking the BoxUnpacking the BoxRemove all the items from the box and make sure that the box includes the following items.Unpacking the BoxOfficeSta

2-53Software Installation and Operation󲽕 Click “Hardware Settings(LAN/Local)” menu from NCT-2000-XP Console.󲽖 Click “UTMA/UTSA Devices” setup menu.󲽗 S

2-54Software Installation and OperationUSB Device Assignment(s) The USB port in the Host PC can be set to use USB storage devices connected to the Hos

2-55Software Installation and Operation󲽘 Click “Use default prevent setting from system settings” then select“UTMA MAC Address” to share the USB Port

2-56Software Installation and Operation▶Depending on the model, your OfficeStation’s functions may look slightly different than those from this NCT-20

FAQGlossaryFCC Information to Use

A-2FAQFAQNetwork Configuration Setting< Cross Cable>< Host PC ><OfficeStation>How do I connect the OfficeStation directly to the Hos

A-3FAQIf a router/hub is connected to the Host PC, how do I connect an OfficeStation terminal to the Host PC with a static IP address?QYou have to all

A-4FAQI am not connected and a screen displays the "DHCP server was not found" message. Q●OfficeStation is set to get the IP address dynamic

A-5FAQ6. Remove the check for the “Remote Desktop” option in the “Advanced” tab of the “Advanced Settings” window.●If you use a certain firewall progr

A-6FAQWhat games can I play? QYou can run only 2D games and Internet casual games such as a java and flash type.Refer to the list below for what is no

CONTENTSCONTENTSCONTENTSSystem IntroductionsIntroductions₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ 1-2Overview₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩

A-7FAQI want to upgrade the speed of the OfficeStation. QRefer to the below items for an increase in the speed:● Use a CPU which utilizes Hyper-Thread

A-8FAQWhen “Connect” is clicked in OfficeStation, “TS ERROR - INVALID OR NO SERIAL NUMBER” message appears and no connection is made.QThis message app

A-9FAQStatus of serial number appears as “Expired” and OfficeStation can not be connected.QThis happens when user changed Host PC's system date t

A-10FAQCan I have the user's name appear when logging on OfficeStation?QYes, you can. In the initial screen of OfficeStation, select “Setup” →“TS

A-11FAQUSB storage device connected to Host PC can not be used in OfficeStation.QYou must change the setting to use USB storage device inOfficeStation

A-12GlossaryGlossaryMulti user WoIP(Windows over IP)New network protocol that enables a PC to operate multi windows simultaneously in virtual memory a

A-13FCC Information to UseFCC Information to UseChange or modification not expressly approved by the party responsible for Compliance could void the u

Headquarter Office2nd Floor, Daeyoung Bldg, 1423-6, Gwanyang1-Dong,Dongan-Gu, Anyang-City, Gyeonggi-Do, Korea 431-870TEL : 82-31-422-5157FAX : 82-31-

IntroductionsOverviewConnecting Peripheral Devices