Gateway FPD1975W User Manual download pdf (Page 23)

www.gateway.com

No power

Make sure that the power cord is connected correctly to both the back of the monitor and the

wall outlet. For more information about connecting the power cord, see “Connecting the monitor”

on page 2.

Display colors are wrong

• Press the Auto button to automatically adjust the display image to the ideal settings.

• Restart your computer with the monitor turned on.

• Make sure that the video cable is connected securely to the back of the monitor and your

computer. For more information about connecting the video cable, see “Connecting the

monitor” on page 2.

• Make sure that the video cable is not damaged.

• Check the end of the video cable for any pins that might be bent or pushed in.

Color is not uniform

• Press the Auto button to automatically adjust the display image to the ideal settings.

• Make sure that the monitor warms up for at least 30 minutes before making a final

judgment about color uniformity or brightness.

No picture

• Press the Input button to make sure that you have selected the correct video source.

• Make sure that the power cord is connected correctly to both the back of the monitor and

the wall outlet. For more information about connecting the power cord, see “Connecting

the monitor” on page 2.

• Make sure that the video cable is connected securely to the back of the monitor and

computer. For more information about connecting the video cable, see “Connecting the

monitor” on page 2.

• Make sure that the monitor is turned on.

• If the power LED is orange:

• Make sure that your computer is turned on.

• Move the mouse or press any key on the keyboard to bring the monitor out of sleep

mode.

• Restart your computer with the monitor turned on.

• Make sure that the video cable is not damaged.

• Check the end of the video cable for any pins that might be bent or pushed in.

• Turn off the monitor and unplug the video cable from the back of your computer. Turn

the monitor back on and wait for ten seconds. If the monitor is functioning correctly, a

“No Signal” message appears. For more information about connecting the video cable, see

“Connecting the monitor” on page 2.

Picture has shadows or “ghosts”

• Press the Auto button to automatically adjust the display image to the ideal settings.

• Remove any extension cables or switchboxes.

• Make sure that the video cable is connected securely to the back of the monitor and your

computer. For more information about connecting the video cable, see “Connecting the

monitor” on page 2..

• Make sure that the video cable is not damaged.

• Check the end of the video cable for any pins that might be bent or pushed in.

8512147.book Page 19 Thursday, February 1, 2007 9:53 AM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comments to this Manuals

No comments

Gateway FPD1975W User Manual Page 23

Comments to this Manuals

Related products and manuals for Monitors Gateway FPD1975W