Gateway FPD2200 User Manual download pdf (Page 17)

A15

Troubleshooting

Check the following before calling for service.

Display Position is incorrect.

Select AUTO in the OSD menu.

If the results are unsatisfactory, adjust the image position using the position icon in

the on screen display.

On the screen background, vertical bars or stripes are visible.

Select AUTO in the OSD menu.

If the results are unsatisfactory, decrease the vertical bars or stripes using the

CLOCK icon in the on screen display.

Any horizontal noise appearing in any image or characters are not clearly

portraid.

Select AUTO in the OSD menu.

If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon

in the on screen display.

Check signal Cable message.

The signal cable is not connected, or is loose. Check and secure the connection.

OUT OF RANGE message appears.

Picture is blank.

The frequency of the signal from the video card is outside the operating range of

the monitor.

Horizontal Frequency: 30kHz-70kHz

Vertical Frequency: 56Hz-61Hz

Use the graphics board's utility software to change the frequency setting (Refer to the

manual for graphics board).

*You can change the setup to the supported resolution using the Safe Mode (Press the F8

key during booting the system).

The power LED is illuminated amber.

The monitor is in its display power management mode.

There is no active signal coming from the PC.

The signal cable is not fastened securely.

Check the computer power and graphics adapter configuration.

The monitor doesn't enter the power saving off mode (Amber).

Computer video signal is not VESA DPMS standard. Either the PC or the video

controller card is not using the VESA DPMS power management function.

NOTE

If the power indicator(LED) light is blinking amber, may result in abnomal condition of

the monitor.

Then press a power ON/OFF button on the front panel control and call your service

technician for more information.

1 2 ... 12 13 14 15 16 17 18

No comments

Gateway FPD2200 User Manual Page 17