Gateway E-3200 User Manual download pdf (Page 44)

System Components 35

Adding an expansion card

The E-3200 chassis has three expansion slots for PCI/ISA cards and one

slot for an AGP card.

The riser card has two PCI connectors and one shared PCI/ISA connector.

For the shared slot, so you can install either a PCI or ISA expansion card,

but not both. The AGP connector is on the system board.

Some ISA expansion cards have jumpers or switches that set interrupts and

I/O addresses. They come with instructions that explain how to set them to

avoid hardware conflicts. Follow the instructions carefully.

Set any jumpers and switches on the card, if required in the card

instructions.

Turn off the system and disconnect the power cord.

Open the case, observing the “Static Electricity Precautions” on

page 2.

Remove the slot cover bracket by pressing downward and outward on

the tab.

To add a PCI/ISA expansion card

Important!

The on-board AGP is

automatically disabled if an

AGP add-in card is used.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 89 90

No comments

Gateway E-3200 User Manual Page 44