Gateway E-2500D User Manual download pdf (Page 92)

www.gateway.com

Creating an Ethernet network

■ Router Name and Domain Name - Check with your ISP to see if entries are required

in these fields and, if so, what entries are required. Normally, leaving the fields

blank will work.

■ LAN IP Address - We recommend that you accept the defaults.

■ WAN IP Address - If your ISP assigns you a different IP address each time you

log on, click

Obtain an IP Address Automatically. If your ISP requires a fixed IP

address, click

Specify an IP Address, then type the values provided by your ISP.

4 When you are finished entering information on the Setup page, click Apply.

5 Click the DHCP tab on the top of the screen.

6 Click the Enable checkbox, then click Apply.

7 Press the reset button on your cable or DSL modem, then restart the computer. Your

network should be running. Go to “Testing your network” on page 88.

8510807.book Page 87 Thursday, June 30, 2005 7:27 AM

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 109 110

No comments

Gateway E-2500D User Manual Page 92