Gateway FX User Manual download pdf (Page 106)

CHAPTER 6: Troubleshooting

100

4 Insert a blank, recordable disc into a recordable disc

drive, then click Next. If an AutoPlay dialog box opens,

click the x in the upper-right corner to close it.

A dialog box opens that tells you the number of blank

discs you need to create a full set of recovery discs.

5 If you have enough blank discs of the specified type, click

I have enough discs, then click Next. If you do not have

enough discs, choose a different disc type, or click

Cancel.

The disc recording begins. Label the discs as they are

completed.

6 If multiple discs are required, insert the additional blank

disks when prompted.

7 When the process is finished, the Congratulations!

window opens.

8 Click Finish.

9 Remove your final disc, then label all of the discs and

store them in a safe place.

Important

Use a permanent marker to label each disc “Software and Driver

Recovery,” along with a short description of which computer the discs are

for. If you are recording multiple discs, as you remove each disc from the

drive, use the marker to label each disc 1 of x, 2 of x, 3ofx, and so on.

Tip

After a recovery disc is created, your computer names the disc

Recovery13 for disc 1 of a 3-disc set, Recovery23 for disc 2, and so on.

8512834.book Page 100 Wednesday, November 7, 2007 1:31 PM

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 139 140

No comments

Gateway FX User Manual Page 106