Gateway E-9425R User Manual download pdf (Page 26)

CHAPTER 3: Maintaining Your Server

Caring for your server

To extend the life of your server:

• Be careful not to bump or drop your server.

• When transporting your server, we recommend that you put it in the original packaging

materials.

• Keep your server and magnetic media away from equipment that generates magnetic

fields, such as unshielded speakers.

• Avoid subjecting your server to extreme temperatures. Do not expose your server to

heating ducts or other heat-generating objects. Damage caused by extreme temperatures

is not covered by your warranty. As a general rule, your server is safest at temperatures

that are comfortable for you.

• Keep all liquids away from your server. When spilled onto server components, almost any

liquid can result in extremely expensive repairs that are not covered under your warranty.

• Avoid dusty or dirty work environments. Dust and dirt can clog the internal mechanisms

and can cause the server to overheat.

Cleaning your server

Keeping your server clean and the vents free from dust helps keep your server performing at

its best. Your server cleaning kit could include:

• A soft, lint-free cloth

• Glass cleaner

• An aerosol can of air with a narrow, straw-like extension

• Isopropyl alcohol

• Cotton swabs

• A tape drive cleaning cartridge (if a tape drive is installed)

• An optical drive cleaning kit

Cleaning tips

• Always turn off your server and other peripheral devices before cleaning any components.

• Use a damp, lint-free cloth to clean your server and other parts of your server system. Do

not use abrasive or solvent cleaners because they can damage the finish on components.

• Keep the cooling vents free of dust. With your server turned off and unplugged, brush

the dust away from the vents with a damp cloth, but be careful not to drip any water into

the vents.

Cleaning the keyboard

You should clean the keyboard occasionally by using an aerosol can of air with a narrow,

straw-like extension to remove dust and lint trapped under the keys.

If you spill liquid on the keyboard, turn off your server and turn the keyboard upside down to

let the liquid drain. Let the keyboard dry completely before trying to use it again. If the keyboard

does not work after it dries, you may need to replace it. Keyboard damage resulting from spilled

liquids is not covered by your warranty.

Warning

When you shut down your server, the power turns off, but some electrical current

still flows through your server. To avoid possible injury from electrical shock, unplug the

power cord and all other cables connected to the server.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 117 118

Comments to this Manuals

No comments

Gateway E-9425R User Manual Page 26

Comments to this Manuals

Related products and manuals for Servers Gateway E-9425R