Gateway E-9425R User Manual download pdf (Page 67)

www.gateway.com

8 Reconnect the power cords and turn on the server. The BIOS is reset.

9 Turn off the server, then disconnect the power cords and all other cables connected to

the server.

10 Follow the instructions in “Opening the server case” on page 29.

11 Place the jumper back onto pins 1-2.

12 Follow the instructions in “Closing the server case” on page 30.

Resetting BIOS passwords

To reset BIOS passwords, you must either reset and clear all BIOS settings, or use the Clear

Password jumper. To reset all BIOS settings, follow the instructions in “Resetting the BIOS” on

page 60.

To clear the BIOS password(s):

1 Follow the instructions in “Preventing static electricity discharge” on page 28. Make sure

that you turn off the server, then unplug the power cord(s) and all other cables connected

to the server.

2 Follow the instructions in “Opening the server case” on page 29.

3 Remove the jumper across pins 1-2 of header J3-A, then place the jumper across pins 2-3.

4 Follow the instructions in “Closing the server case” on page 30.

5 Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.

6 Turn off the server, then disconnect the power cords and all other cables connected to

the server.

7 Follow the instructions in “Opening the server case” on page 29.

8 Place the jumper back onto pins 1-2.

9 Follow the instructions in “Closing the server case” on page 30.

Caution

Moving the jumper while the power is on can damage your server. Always

turn off the server and unplug the power cords and all other cables before changing

the jumper.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 117 118

No comments

Gateway E-9425R User Manual Page 67